News

When using electric steam generators, if there is insufficient air pressure, how can we solve it? The following is by Xinda boiler to explain it to you.

Reasons:
1. Heating time is too short
2. The water level is too low

Solution measure:
1. Check whether the heating tube of the electric steam generator is damaged. If so, replace it in time.
2. Check whether internal cables are abnormal and power supplies are improperly connected
3. Check whether the fuse of the electric steam generator is damaged. If it is damaged, repair or replace it in time.
4. Check whether the contactor of the electric steam generator is damaged. If so, replace it in time

If the operation is not proper, it is easy to lead to insufficient pressure of the electric steam generator. Although the electric steam generator air pressure is insufficient will not damage the equipment, but affect the work efficiency. So when we use the electric steam generators, we must follow the correct operation process. If there is any problem, contact the manufacturer to solve it.

With the improvement of consumption level, people’s demand for cans also increases. The canning process is not simple. First of all, raw materials should be selected, peeled and cleaned. Then the high temperature cooking treatment, processing after the completion of the need for canning sterilization, cooling treatment, and add the corresponding auxiliary materials. In the process of processing, the steam generator can be used to produce high temperature and high pressure steam to cook the raw materials and sterilize the jars. The use of supporting cooking equipment, canning equipment and sterilization equipment effect to a higher level.

Xinda steam generators can adjust the temperature independently, the high temperature steam can be disinfected and sterilized, sterilization rate can reach more than 90%, this is conducive to the long-term preservation of cans. Xinda steam generators 3-5 minutes fast steam, can be 24 hours uninterrupted production, greatly improve the production efficiency. Xinda steam generator for food industry drying, heating, cooking, sterilization, etc. It is also one of the most commonly used devices in the food industry.

In the production process, the textile industry to air humidity requirements are relatively high. If the production in the air is relatively dry, low humidity conditions, it is easy to break yarn, fabric fuzz, electrostatic enhancement, and even affect the production efficiency, serious injury will cause personnel. So humidification is very important for the textile industry. This can effectively improve the workshop humidity, prevent the air is too dry static electricity, improve production efficiency.

The textile industry uses the high temperature and high pressure generated by the steam generators to soften, dry and melt the raw materials in a series of process operations, so as to achieve the process temperature required by the textile. The humidification effect is better if the steam generator is used. This not only keeps the workshop at the right humidity. It also increases productivity.

Electric steam generators have the advantages of small and portable, convenient installation, fast steam, high degree of automation, so it is loved by the market, many users in the choice of boiler, will give priority to electric steam generator, but we need to pay attention to when using electric steam generator what matters? Today Xinda boiler for you to explain it specifically.

1. Before the electric steam generator starts to work, check whether each valve instrument of the boiler is abnormal. If so, replace or repair promptly.

2. After the boiler starts to operate, it is necessary to always look at the water level of the boiler. When the water level is too low, the boiler will dry burn due to serious water shortage, and then damage the equipment. When the water level is too high, a large number of steam with water, thus reducing the quality of steam, affect the normal steam supply, serious superheater tube scaling, damage equipment.

3. Pay attention to the pressure gauge change of the electric steam generator to see whether it is within the normal range. If it is too low or too high, contact the manufacturer to solve the problem.

4. To check whether the motor is abnormal often, once found how abnormal, to deal with immediately.

5. Check the safety valve every week.

6. After the electric steam generator stops, the water inside the boiler should be drained. We need to clean the steam generator regularly to prevent it from scaling and damaging the equipment.

Why does food processing use steam generators? Any food factory production is inseparable from ingredients, heating, sterilization, cleaning, tanks, packaging, etc., so the steam generator plays an important role in the food production process. Food sterilizer is to increase the steam temperature to about 130 degrees, killing microorganisms in the food under high temperature and high pressure.

Xinda steam generator steam temperature is 171C, which can be adjusted to the appropriate temperature of sterilization. Sterilization can extend the shelf life of food and improve food safety.

Electric steam boiler is a kind of micro steam equipment which produces low pressure steam automatically and continuously. Because of its compact appearance and simple operation, it is loved by customers. In general, the rated steam power is 3KW-720KW. The following Xinda boiler to explain it, how to choose suitable electric steam boiler model.

1. Usually, 1kw boiler can heat 10-12 ㎡, 100㎡ house heating is the most suitable for 8-12kw.

2. According to the amount of steam required by the customer per unit hour, if the customer needs steam for 100kg/h, 72kw electric boiler can be recommended to the customer.

3. Electric steam boiler power too high or too low can not achieve the appropriate effect, too high will cause waste, too low can not achieve the expected amount of steam, it is recommended to consult the manufacturer to recommend a suitable model.

With the continuous progress of technology, the service life of steam generators are now about 10 years. But how long can use the steam generators, in addition to the quality of the boiler itself, we also need to safely use the steam generator, do a good job of regular maintenance. The following Xinda boiler for you to explain the steam generators use knowledge.

Steam generators from design to production, we uphold the attitude of excellence, to provide customers with high quality products. The selection of superior materials for each accessories valve, it can effectively improve the quality of products and increase the life of products.

When using the steam generator, the operation instructions of the steam generator should be followed. Otherwise, the service life of the steam generator will be affected and the boiler accident will be seriously caused. Water quality to meet the standard, it is best to add water softener before water.

It is important to maintain the steam generators regularly. For example, winter should do a good job of anti-freezing measures, so as not to freeze the equipment, affecting the normal operation. After the steam generator stops running, it is necessary to drain the water inside the boiler to avoid scale corrosion equipment and reduce the service life of the steam generator.

In order to ensure the normal and stable operation, we should carry out daily maintenance on the steam generator. It is important to maintain the steam generator during the cold winter. So how to maintain the steam generator? Xinda Boiler will give you a specific explanation.

Regarding antifreeze: If the steam generator is installed at a temperature below 0 ℃, it is necessary to take antifreeze measures to prevent pipes, water pumps, water level gauges, and furnaces from freezing and cracking, which may affect the normal operation of the steam generators. After the boiler stops, open the drain valve to drain the internal water of the boiler.

Water level gauge: It is necessary to frequently check for changes in water level. If the water level does not change, the water level gauge may be blocked and should be immediately flushed or replaced.

Safety valve: The safety valve should be manually discharged 1 to 2 times regularly, prevent the valve disc and valve seat from sticking, thereby affecting the normal operation of the equipment