News

When the boiler is running, it needs to maintain normal water level. If the water level is too low, the steam generator will dry burn without water, damage the steam generator, and cause accidents in serious cases. The high water level increases the heating time of the steam generator and affects the normal use. So we need to control the water level of the steam generator.

Tea is one of our favorite drinks. The most important process in the tea making process is the drying of tea leaves. These two processes ensure the taste of tea. First of all, the temperature must be accurate, otherwise the fried tea is not cooked evenly, and the temperature and pressure of the steam generator can be adjusted, the steam purity is high, the pressure stability is strong, and the automatic control is more labor and cost saving.

The hot and humid environment provided by the steam generator can promote the chemical reaction inside the tea, making the tea softer and easier to follow the process. Proper steam can promote the transformation and reaction of the substances inside the tea, ‌ releases more aroma components, ‌ makes the tea have a unique and rich fragrance.

Xinda steam generator energy saving and environmental protection, the generated steam can be used repeatedly, not only improve the production efficiency and save costs, but also reduce the pollution to the environment.

Step 1: First cut off the power supply to ensure safe operation. The wiring mode of the steam generator heating tube can be taken with the mobile phone in advance for reference for rewiring after replacement, and then loosen the heating tube connection line.
Step 2: Drain the sewage from the generator before officially replacing the damaged heating tube.
Step 3: After the sewage is exhausted, use a wrench to unscrew the heating pipe and remove the damaged heating pipe. Then clean up the residue inside the generator. After the residue in the boiler is treated, smooth the surface of the connecting port with coarse sandpaper to ensure that the connection is tight and watertight.
Step 4: Smooth the surface of the connection with coarse sandpaper to ensure tight connection without water leakage.
Step 5: Tighten the screws, connect the wires in the correct way before, and check and reinforce the screws at the connection frequently.
Step 6: After the connection is completed, check the voltage at the steam generator switch with the multimeter to ensure that the input voltage is correct, check and strengthen each connection.

According to the use of environmental steam generator water will also be different, lake, river, tap water or groundwater are useful, these untreated water contains a lot of substances, long-term accumulation will precipitate in the steam generator, if not treated in time is a safety hazard. So how to do blowdown? Follow us to understand below.

1. Frequent discharge: that is to say, the number of blowdowns should be more, especially when the bottom discharge is used to remove water slag, a short time and multiple blowdowns are much better than a long time and one blowdown.
2. Less discharge: as long as the frequent discharge, it will inevitably be less discharge, that is, the amount of pollution each time is less, which can not only ensure that the steam supply is not affected, but also make the quality of the pot water is always controlled within the standard range, without large fluctuations, which is very beneficial to boiler maintenance.
3. Balanced discharge: that is to say, the time interval of each discharge should be roughly the same, so that the quality of the pot water is often maintained in a balanced state.